← THE KNOW-HOW / ALL ARTICLES

You do not need to diagnose a machine yourself. A clear description of what happened, when it happened and what the display showed helps the technician prepare.

Identify the equipment

Record the manufacturer, model, serial number if accessible, and which system or machine it belongs to. A photo of the external nameplate can help if it can be taken without opening a cabinet or entering a hazardous area.

Describe the exact symptom

Explain what should happen and what actually happens. “The pump runs for 20 seconds, then stops” is more useful than “the pump is faulty.” Include unusual noise, vibration, temperature or loss of output observed from a safe position.

Capture codes and indicator lights

Write down the full alarm code and displayed text. A photo of the display can be useful. Do not clear the alarm before recording it unless the equipment procedure or responsible technician directs you to do so.

Record when it happens

Note whether the fault occurs at startup, under load, after running for a while or intermittently. Include the date, time, frequency and operating conditions.

List recent changes

Tell the technician about recent maintenance, component replacement, parameter changes, power interruptions, water ingress or process changes. Do not change PLC parameters or bypass interlocks just to make the system run.

Keep the site safe

If equipment is overheating, sparking, leaking dangerously or moving unexpectedly, keep people clear and follow the site's safety and isolation procedures. Only authorised, trained personnel should work inside control panels.

Quick report checklist: model · exact symptom · fault code · when it happens · recent changes · actions already taken · site contact.